G10 - Retract

Description

Retract the filament according to settings of M207.

Firmware retraction allows you to tune retraction at the machine level and can significantly reduce the size of G-code files.

Multiple consecutive G10 or G10 S1 commands without a corresponding G11 or G11 S1 will be ignored.

Performs two moves: a retract move at the retract feedrate/acceleration, and an optional Z lift at the maximum Z feedrate (travel acceleration).

Notes

Requires FWRETRACT.

See related codes G11, M207, M208, and M209.

Parameters

G10 [S<flag>]
[S<flag>]

Use G10 S1 to do a swap retraction, before changing extruders. The subsequent G11 (after tool change) will do a swap recover. (Requires EXTRUDERS > 1)

Examples

G10 ; retract